Skip to main content

Technique uses magnets, light to control and reconfigure soft robots

Researchers from North Carolina State University and Elon University have developed a technique that allows them to remotely control the movement of soft robots, lock them into position for as long as needed and later reconfigure the robots into new shapes. The technique relies on light and magnetic fields.
"We're particularly excited about the reconfigurability," says Joe Tracy, a professor of materials science and engineering at NC State and corresponding author of a paper on the work. "By engineering the properties of the material, we can control the soft robot's movement remotely; we can get it to hold a given shape; we can then return the robot to its original shape or further modify its movement; and we can do this repeatedly. All of those things are valuable, in terms of this technology's utility in biomedical or aerospace applications."
For this work, the researchers used soft robots made of a polymer embedded with magnetic iron microparticles. Under normal conditions, the material is relatively stiff and holds its shape. However, researchers can heat up the material using light from a light-emitting diode (LED), which makes the polymer pliable. Once pliable, researchers demonstrated that they could control the shape of the robot remotely by applying a magnetic field. After forming the desired shape, researchers could remove the LED light, allowing the robot to resume its original stiffness -- effectively locking the shape in place.
By applying the light a second time and removing the magnetic field, the researchers could get the soft robots to return to their original shapes. Or they could apply the light again and manipulate the magnetic field to move the robots or get them to assume new shapes.
In experimental testing, the researchers demonstrated that the soft robots could be used to form "grabbers" for lifting and transporting objects. The soft robots could also be used as cantilevers, or folded into "flowers" with petals that bend in different directions.
"We are not limited to binary configurations, such as a grabber being either open or closed," says Jessica Liu, first author of the paper and a Ph.D. student at NC State. "We can control the light to ensure that a robot will hold its shape at any point."
In addition, the researchers developed a computational model that can be used to streamline the soft robot design process. The model allows them to fine-tune a robot's shape, polymer thickness, the abundance of iron microparticles in the polymer, and the size and direction of the required magnetic field before constructing a prototype to accomplish a specific task.
"Next steps include optimizing the polymer for different applications," Tracy says. "For example, engineering polymers that respond at different temperatures in order to meet the needs of specific applications."
The paper, "Photothermally and Magnetically Controlled Reconfiguration of Polymer Composites for Soft Robotics," appears in the journal Science Advances. First author of the paper is Jessica Liu, a Ph.D. student at NC State. The paper was co-authored by Jonathan Gillen, a former undergraduate at NC State; Sumeet Mishra, a former Ph.D. student at NC State; and Benjamin Evans, an associate professor of physics at Elon University.
The work was done with support from the National Science Foundation (NSF) under grants CMMI-1663416 and CMMI-1662641. The work was also supported by the Research Triangle MRSEC, which is funded by NSF under grant DMR-1121107; and by NC State's Analytical Instrumentation Facility and the Duke University Shared Materials Instrumentation Facility, which are supported by the State of North Carolina and NSF grant ECCS-1542015.
Story Source:
Materials provided by North Carolina State University. 
Note: Content may be edited.

Comments

Post a Comment

Popular posts from this blog

Size matters: New data reveals cell size sparks genome awakening in embryos

Transitions are a hallmark of life. When dormant plants flower in the spring or when a young adult strikes out on their own, there is a shift in control. Similarly, there is a transition during early development when an embryo undergoes biochemical changes, switching from being controlled by maternal molecules to being governed by its own genome. For the first time, a team from the Perelman School of Medicine at the University of Pennsylvania found in an embryo that activation of its genome does not happen all at once, instead it follows a specific pattern controlled primarily by the various sizes of its cells. The researchers published their results this week as the cover story in  Developmental Cell . In an early embryo undergoing cell division, maternally loaded RNA and proteins regulate the cell cycle. The genomes of the zygote -- a term for the fertilized egg -- are initially in sleep mode. However, at a point in the early life of the embryo, these zygotic nuclei "wake...
Post a Comment
Read more

Home births as safe as hospital births: International study suggests

A large international study led by McMaster University shows that low risk pregnant women who intend to give birth at home have no increased chance of the baby's perinatal or neonatal death compared to other low risk women who intend to give birth in a hospital. The results have been published by  The Lancet 's  EClinicalMedicine  journal. "More women in well-resourced countries are choosing birth at home, but concerns have persisted about their safety," said Eileen Hutton, professor emeritus of obstetrics and gynecology at McMaster, founding director of the McMaster Midwifery Research Centre and first author of the paper. "This research clearly demonstrates the risk is no different when the birth is intended to be at home or in hospital." The study examined the safety of place of birth by reporting on the risk of death at the time of birth or within the first four weeks, and found no clinically important or statistically different risk between home...
Post a Comment
Read more

Molecular adlayer produced by dissolving water-insoluble nanographene in water

Molecular adlayer produced by dissolving water-insoluble nanographene in water : "Nanographene incorporated micelle capsules" can be prepared by simply pulverizing and mixing nanographene with amphiphilic V-shaped anthracene molecules in water at room temperature. Even though nanographene is insoluble in water and organic solvents, Kumamoto University (KU) and Tokyo Institute of Technology (Tokyo Tech) researchers have found a way to dissolve it in water. Using "molecular containers" that encapsulate water-insoluble molecules, the researchers developed a formation procedure for a nanographene adlayer, a layer that chemically interacts with the underlying substance, by just mixing the molecular containers and nanographene together in water. The method is expected to be useful for the fabrication and analysis of next-generation functional nanomaterials. Graphene is a single layer of carbon atoms arranged in sheet form. It is lighter than metal wit...
Post a Comment
Read more