Skip to main content

Colliding lasers double the energy of proton beams !!

Researchers from Sweden's Chalmers University of Technology and the University of Gothenburg present a new method which can double the energy of a proton beam produced by laser-based particle accelerators. The breakthrough could lead to more compact, cheaper equipment that could be useful for many applications, including proton therapy.

Proton therapy involves firing a beam of accelerated protons at cancerous tumours, killing them through irradiation. But the equipment needed is so large and expensive that it only exists in a few locations worldwide.
Modern high-powered lasers offer the potential to reduce the equipment's size and cost, since they can accelerate particles over a much shorter distance than traditional accelerators -- reducing the distance required from kilometres to metres. The problem is, despite efforts from researchers around the world, laser generated proton beams are currently not energetic enough. But now, the Swedish researchers present a new method which yields a doubling of the energy -- a major leap forward.
The standard approach involves firing a laser pulse at a thin metallic foil, with the interaction resulting in a beam of highly charged protons. The new method involves instead first splitting the laser into two less intense pulses, before firing both at the foil from two different angles simultaneously. When the two pulses collide on the foil, the resultant electromagnetic fields heat the foil extremely efficiently. The technique results in higher energy protons whilst using the same initial laser energy as the standard approach.
"This has worked even better than we dared hope. The aim is to reach the energy levels that are actually used in proton therapy today. In the future it might then be possible to build more compact equipment, just a tenth of the current size, so that a normal hospital could be able to offer their patients proton therapy," says Julien Ferri, a researcher at the Department of Physics at Chalmers, and one of the scientists behind the discovery.
The unique advantage of proton therapy is its precision in targeting cancer cells, killing them without injuring healthy cells or organs close by. The method is therefore crucial for treating deep-seated tumours, located in the brain or spine, for example. The higher energy the proton beam has, the further into the body it can penetrate to fight cancer cells.
Although the researchers' achievement in doubling the energy of the proton beams represents a great breakthrough, the end goal is still a long way off.
"We need to achieve up to 10 times the current energy levels to really target deeper into the body. One of my ambitions is to help more people get access to proton therapy. Maybe that lies 30 years in the future, but every step forward is important," says Tünde  Fülöp, Professor at the Department of Physics at Chalmers.
Accelerated protons are not only interesting for cancer treatment. They can be used to investigate and analyse different materials, and to make radioactive material less harmful. They are also important for the space industry. Energetic protons constitute a large part of cosmic radiation, which damages satellites and other space equipment. Producing energetic protons in the lab allows researchers to study how such damage occurs, and to develop new materials which can better withstand the stresses of space travel.
Together with research colleague Evangelos Siminos at the University of Gothenburg, Chalmers researchers Julian Ferri and Tünde Fülöp used numerical simulations to show the feasibility of the method. Their next step is to conduct experiments in collaboration with Lund University.
"We are now looking at several ways to further increase the energy level in the proton beams. Imagine focusing all the sunlight hitting the Earth at a given moment onto a single grain of sand -- that would still be less than the intensity of the laser beams that we are working with. The challenge is to deliver even more of the laser energy to the protons." says Tünde Fülöp.
The new scientific results have been published in the respected journal Communications Physics, part of the Nature family. Read the scientific article "Enhanced target normal sheath acceleration using colliding laser pulses."
Article Source:
Materials provided by Chalmers University of Technology. 
Note: Content may be edited.

Comments

Post a Comment

Popular posts from this blog

Size matters: New data reveals cell size sparks genome awakening in embryos

Transitions are a hallmark of life. When dormant plants flower in the spring or when a young adult strikes out on their own, there is a shift in control. Similarly, there is a transition during early development when an embryo undergoes biochemical changes, switching from being controlled by maternal molecules to being governed by its own genome. For the first time, a team from the Perelman School of Medicine at the University of Pennsylvania found in an embryo that activation of its genome does not happen all at once, instead it follows a specific pattern controlled primarily by the various sizes of its cells. The researchers published their results this week as the cover story in  Developmental Cell . In an early embryo undergoing cell division, maternally loaded RNA and proteins regulate the cell cycle. The genomes of the zygote -- a term for the fertilized egg -- are initially in sleep mode. However, at a point in the early life of the embryo, these zygotic nuclei "wake...
Post a Comment
Read more

Home births as safe as hospital births: International study suggests

A large international study led by McMaster University shows that low risk pregnant women who intend to give birth at home have no increased chance of the baby's perinatal or neonatal death compared to other low risk women who intend to give birth in a hospital. The results have been published by  The Lancet 's  EClinicalMedicine  journal. "More women in well-resourced countries are choosing birth at home, but concerns have persisted about their safety," said Eileen Hutton, professor emeritus of obstetrics and gynecology at McMaster, founding director of the McMaster Midwifery Research Centre and first author of the paper. "This research clearly demonstrates the risk is no different when the birth is intended to be at home or in hospital." The study examined the safety of place of birth by reporting on the risk of death at the time of birth or within the first four weeks, and found no clinically important or statistically different risk between home...
Post a Comment
Read more

Molecular adlayer produced by dissolving water-insoluble nanographene in water

Molecular adlayer produced by dissolving water-insoluble nanographene in water : "Nanographene incorporated micelle capsules" can be prepared by simply pulverizing and mixing nanographene with amphiphilic V-shaped anthracene molecules in water at room temperature. Even though nanographene is insoluble in water and organic solvents, Kumamoto University (KU) and Tokyo Institute of Technology (Tokyo Tech) researchers have found a way to dissolve it in water. Using "molecular containers" that encapsulate water-insoluble molecules, the researchers developed a formation procedure for a nanographene adlayer, a layer that chemically interacts with the underlying substance, by just mixing the molecular containers and nanographene together in water. The method is expected to be useful for the fabrication and analysis of next-generation functional nanomaterials. Graphene is a single layer of carbon atoms arranged in sheet form. It is lighter than metal wit...
Post a Comment
Read more