Skip to main content



Strong, flexible films that allow light in but keep electromagnetic interference out:


               TEM image of exfoliated as-prepared MXene ?akes

A new technique to produce relatively low-cost electromagnetic interference (EMI)-blocking composite films has been developed by a team the NYU Tandon School of Engineering, Distinguished University, Drexel University and Yale University.
To fashion the films, the team employed spin-spray layer-by-layer processing (SSLbL), a method Associate Professor Andre Taylor of NYU pioneered in 2012. The system employs mounted spray heads above a spin coater that deposit sequential nano meter-thick mono layers of oppositely charged compounds on a component. According to the team, this produces high quality films in much less time than by traditional methods, such as dip coating.
The process allowed them to fashion flexible, semi-transparent EMI-shielding film comprising hundreds of alternating layers of carbon nano tube (CNT), an oppositely charged titanium carbide called MXene – a family of carbide flakes – and poly electrolytes.
Assoc Prof. Taylor explained that those charge characteristics confer benefits beyond EMI shielding. "As we worked to discern the roles different components play," he said, "We found that the strong electrostatic and hydrogen bonding between oppositely charged CNT and MXene layers conferred high strength and flexibility."
He added that MXene has the dual benefits of being both adsorbing (it easily adheres to a surface) and conductive, which is important for blocking EMI. "And since the film itself is semi-transparent, it has the benefit of being applicable as EMI shielding for devices with display screens, such as smartphones. Other kinds of shields, metal for example, are opaque. Shielding is good, but shielding that allows visible light through is even better."The SSLbL method also confers nano meter-level control over the architecture of the film, allowing manufacturers to change specific qualifies such as conductivity or transparency, because it enables discrete changes in the composition of each layer. By contrast, films comprising a monolayer mélange of nano particles, poly electrolytes and graphene in a matrix cannot be so modified. Besides high stability, flexibility and semi-transparency, the MXene-CNT composite films also demonstrated high conductivity, a property critical to EM shielding because it dissipates EM pulses across the film's surface, weakening and dispersing it.
While manufacturers have shown interest in EMI shielding made of carbon nano tubes and graphene combined with conductive polymer composites, until now a relatively fast, inexpensive, means of creating an optimal mix of these qualities on a thin flexible film was elusive, explained Assoc Prof. Taylor.
"The primary interest in adding carbon materials to shielding was to add conductive pathways through the film," said Assoc Prof. Taylor. "But the SSLbL system is also much faster than traditional dip coating, in which a component to be shielded is repeatedly dipped in a material, rinsed, then dipped again in another layer, and so on and so on. That takes days. Our system can create hundreds of bi-layers of alternating MXene and CNT – in minutes."
While spin-spraying limits component size, Assoc Prof. Taylor said that, in theory, the system could create EMI shielding for devices and components equivalent in diameter to the 12-inch wafers, for which spin-coating is frequently employed as a coating mechanism in the semiconductor industry.
"It is less expensive to produce it this way and faster because of the tighter connection between materials, and the LbL process facilitates the controlled arrangement and assembly of disparate nano structured materials much better than just depositing repeated layers of a mix on several components. One can envision tuning the desired properties of a cross-functional thin film using a wide range of parameters, nano structured materials and poly electrolytes using this system."

Comments

Post a Comment

Popular posts from this blog

Dark matter may be older than the Big Bang

Dark matter, which researchers believe make up about 80% of the universe's mass, is one of the most elusive mysteries in modern physics. What exactly it is and how it came to be is a mystery, but a new Johns Hopkins University study now suggests that dark matter may have existed before the Big Bang. The study, published August 7 in  Physical Review Letters , presents a new idea of how dark matter was born and how to identify it with astronomical observations. "The study revealed a new connection between particle physics and astronomy. If dark matter consists of new particles that were born before the Big Bang, they affect the way galaxies are distributed in the sky in a unique way. This connection may be used to reveal their identity and make conclusions about the times before the Big Bang too," says Tommi Tenkanen, a postdoctoral fellow in Physics and Astronomy at the Johns Hopkins University and the study's author. While not much is known about its origins,...
Post a Comment
Read more

Home births as safe as hospital births: International study suggests

A large international study led by McMaster University shows that low risk pregnant women who intend to give birth at home have no increased chance of the baby's perinatal or neonatal death compared to other low risk women who intend to give birth in a hospital. The results have been published by  The Lancet 's  EClinicalMedicine  journal. "More women in well-resourced countries are choosing birth at home, but concerns have persisted about their safety," said Eileen Hutton, professor emeritus of obstetrics and gynecology at McMaster, founding director of the McMaster Midwifery Research Centre and first author of the paper. "This research clearly demonstrates the risk is no different when the birth is intended to be at home or in hospital." The study examined the safety of place of birth by reporting on the risk of death at the time of birth or within the first four weeks, and found no clinically important or statistically different risk between home...
Post a Comment
Read more

GSAT-11 satellite to be launched from French Guiana on Dec 5th

GSAT-11 satellite to be launched from French Guiana on Dec 5th GSAT-11 would be located at 74 East and is the fore-runner in a series of advanced communications satellite with multi-spot beam antenna coverage over Indian mainland and Islands, ISRO said. GSAT-11 is the next generation “high throughput” communication satellite configured around ISRO’s I-6K Bus. (PTI/Representational). Indian space agency ISRO is scheduled to launch GSAT-11, the “heaviest” satellite built by it, on-board Ariane-5 rocket of Arianespace from French Guiana on December 5. Weighing about 5,854 kg, GSAT-11 would play a vital role in providing broadband services across the country, and also provide a platform to demonstrate new generation applications, the Indian Space Research Organisation (ISRO) said. It is the “heaviest” satellite built by ISRO, the space agency said. GSAT-11 is the next generation “high throughput” communication satellite configured around ISRO’s  I-6K Bus, and it...
Post a Comment
Read more